[Pre-Order]TurboNanza kit

Description

 

*This is an open source product designed by zaxour(GitHub link)

TurboNanza is an internal RGB, S-Video, Composite video and Audio modification for the Turbografx 16, PCEngine and CoreGrafx.

Installation Method

PC Engine

Remove resistors R134, R137, R138 and R141

TurboGrafx 16

Remove resistors R130-R132 and R134

Step 2 – Disconnect CVBS pin from original circuit

PC Engine

Remove resistor R145 (20 ohms)

TurboGrafx 16

Remove resistor R127 (20 ohms)

Step 3 – Install TurboNanza

PC Engine

Solder the TurboNanza over the expansion port pins as shown.

Step 4 – Solder S-Video connections

PC Engine

Solder wires from the points shown to the pads on TurboNanza

TurboGrafx 16

Solder wires from the points shown to the pads on TurboNanza

Step 5 – Attach the DIN to the main board

PC Engine

Scrape solder mask off of the area where the RF modulator resided. Align the DIN such that it JUST covers the front mounting hole of the RF port.